Description

Scherer MG80/120 от "CoalMachGroup" Scherer MG80 / 120 type of screw coal combine a new machine with the recommendations of the screw. It has a built-in motor movement and a transverse recess coal. Harvester with a hydraulic supply system, which is used in the coal seam of low power. The total installed capacity of 120 kW. This cutting 2x40 kW electric motor and the feed portion 40 kW. Voltage 1140V. The hydraulic supply system and is used with an adjustable rack gearing. Harvester designed to operate on layers of 0.65 to 1.2 m at angles less than 30 ° and medium strong working surface.

Main Technical Parameters

Parameters of Mining Geological Condition MG80/120-TBW MG80/20
Range of Mining Height 0.65-1.2 m 0.75-1.3 m
Applied Seam Inclination ≤30° ≤30°
Coal Hardness Medium-hard
Feeding Part    
Motor Power 40 kW 40 kW
Haulage Mode Hydraulic Chainless Haulage Gear, Pin-track
Haulage Force 150 kN 150 kN
Haulage Speed 0-5 m/min 0-5 m/min
Matching Conveyor    
Conveyor Model SGZ630/ 150CT
Total Weight 9 t 12 t

Description

Shearer MG100/240 drum coal combine a multi-motor control transverse. Harvester with a hydraulic supply system, which is used in the coal seam of low power. The total installed capacity of 240 kW. Cutting force 2x100 kW propulsion power of 40 kW and a power supply voltage 1140V. Harvester uses hydraulic speed control and traction contact track, it is designed to operate on layers of 0.65 to 1.2 m at angles less than 30 ° and medium strong working surface.

Main Technical Parameters

Parameters of Mining Geological Condition MG100/240-BW
Range of Mining Height 0.76-1.5 m
Applied Seam Inclination ≤35°
Coal Hardness Medium-hard
Height (mm)  
Motor Power 40 kW
Haulage Mode Hydraulic Chainless Haulage
Haulage Force 150 kN
Haulage Speed 0-5 m/min
Matching Conveyor  
Conveyor Model SGZ-630
Total Weight 9 t

Description

Scherer MG160/360 от "CoalMachGroup"Carbon harvester c electric supply part to the AC motor for coalbed low power. It has a built-in motor movement and a transverse recess coal. Combine supply voltage 1140 V. The total installed capacity of 361 kW. This electric cutting 2h2h80 kW electric flow of the 2x15 kW height adjustment 11 kW. The machine is equipped with a frequency converter type "one tow - two ways to" control the feed rate frequency conversion alternating current and applied to the rack engagement. The combine is designed for operation in seams between 1.0 and 1.8 m at the corners of less than 16 ° (≤ 30 ° four-quadrant converter) and medium strength, or at least medium strength carbon f <4) in a fully mechanized coal face.

Technical Parameters

Main Technical Parameters
Parameters of Mining Geological Conditon
Range of Mining Height 1,0.-1.8 m
Applied Seam Inclination ≤16°(Two quadrant converter)
  ≤30°(Four quadrant converter)
Coal Hardness Medium hardness with a small amount of coal
Main Parameters
Machine Height 678 mm
Machine Width 630 mm
Max. Cutting Height 1692 mm
Dinting Depth 156 mm
Cutting Part
Power of Cutting Motor 2х2х80 кW
Rotating Speed of Cutting Head 87,59 r/min
Cutting Head Diameter 900 mm
Feeding Part
Motor Power 2х15 кW
Haulage Mode Gear, Pin-track
Haulage Force 261 кN
Haulage Speed 0-6,68 r/min
Operation Mode
Control Mode (while coal mining) Remote control is also available
Control Machine halt, change of speed, lifting/lowering of the cutting head can be completed through remote control
Spray and Cooling System
Spray Mode Internal & External Spraying
Cooling Method The cooling method of motor, frequency converter and cutting part is water cooling.
Spray Pump Station
Type РВ-200/6,3
Max. Pressure 6,3 МPа
Spray Water Flow 200 l/min
Supply Pipe KJR19|150
Model of Matching Conveyor SGZ630/220
Total Weight 20 t

Description

Scherer MG250/600 от "CoalMachGroup"This is a series of coal combines c electrical supply part. They have a built-in motor movement and a transverse recess coal. The total installed capacity of 600 kW. This cutting 2x250 kW electric motors, electric supply of the 2x40 kW and height adjustment of 18.5 kW. Harvester, supply voltage 1140 V. The machine is equipped with a frequency converter type "one tow - two ways to" control the feed rate frequency conversion alternating current and applied to the rack engagement. The combine is designed for operation in seams between 1.6 and 3.6 m at the corners of less than 16 ° (two-quadrant converter) or less than 35 ° (a four-quadrant converter) and medium strength of coal in the fully mechanized coal face.

Serial type includes:
Shortened type: MG250/600-AWD, MG250/600-QAWD;
Standard Type: MG250/600-WD, MG250/600-QWD;

Main parameters

Main Technical Parameters
Parameters of Mining Geological Condition MG250/600-(Q)AWD MG250/600-(Q)WD
Range of Mining Height 1,6 -3.0 м 1.8 - 3.6 м
Applied Seam Inclination ≤16°(Two quadrant converter)                                                      ≤35°(Four quadrant coverter)
Coal Hardness Medium hardness with a small amount of coal
Main Parameters
Machine Height 678 mm
Machine Width 630 mm
Max. Cutting Height 1692 mm
Dinting Depth 156 mm
Cutting Part
Power of Cutting Motor х2х80 кW 
Rotating Speed of Cutting Head 87,59 r/min 
Cutting Head Diameter 900 mm
Feeding Part
Motor Power 2х15 кW 
Haulage Mode Gear, Pin-track
Haulage Force 261 кN 
Haulage Speed 0-6,68 r/min 
Operation Mode
Control Mode (while coal mining) Remote control is also available
Control Machine halt, change of speed, lifting/lowering of the cutting head can be completed through remote control
Spray and Cooling System
Spray Mode Internal & External Spraying
Cooling Method The cooling method of motor, frequency converter and cutting part is water cooling
Spray Pump Station
Type РВ-200/6,3 
Max. Pressure 6,3 МPа 
Spray Water Flow 200 l/min 
Supply Pipe KJR19|150 
Matching Conveyor SGZ630/220 
Total Weight 20 t 

Description

Scherer MG300/700 от "CoalMachGroup" This is a series of coal combines c electrical supply part. They have a built-in motor movement and a transverse recess coal. The total installed capacity of 700 kW. This cutting 2x300 kW electric motors, electric supply of the 2x40 kW and height adjustment of 18.5 kW. Combine supply voltage 1140 V or 3300V. The machine is equipped with a frequency converter type "one tow - two ways to" control the feed rate frequency conversion alternating current and applied to the rack engagement. The combine is designed for operation in seams between 1.7 and 4.7 m at the corners of less than 16 ° (two-quadrant converter) or less than 35 ° (a four-quadrant converter) and medium strength of coal in the fully mechanized coal face.

Serial type includes:

Shortened type: MG300/700-AWD, MG300/700-QAWD

Standard Type: MG300/700-WD, MG300/700-QWD

Limit type: MG300/700-GWD, MG300/700-QGWD

Main Parameters

Parameters of Mining Geological Condition MG300/700-(Q)AWD MG300/700-(Q)WD MG300/700-(Q)GWD
Range of Mining Height 1,7-3,2m 1,9-3,8m 2,5-4,7m
Applied Seam Inclination ≤16°(Two quadrant converter)
  ≤35°(Four quadrant converter)
Coal Hardness Medium hardness with a small amount of coal
Main Parameters
Machine Height 1300 mm 1438 mm 1960 mm
Machine Width 630, 800 mm
Max. Cutting Height 3070 mm 3680 mm 4700 mm
Dinting Depth 297 mm 540 mm 495 mm
Cutting Part
Power of Cutting Motor 2х300 кW
Rotating Speed of Cutting Head 34,03 39,03 44,38 r/min
Cutting Head Diameter 1600, 1800 mm 1800, 2000 mm 2000, 2240 mm
Feeding Part
Motor Power 2х40 кW
Haulage Mode Gear, Pin-track
Haulage Force 580/350 кN
Haulage Speed 0-7,28-12 m/min
Operation Mode
Control Mode (while coal mining) Remote control is also available
Control Machine halt, change of speed, lifting and lowering of the cutting head can be completed through remote control
Spray and Cooling System
Spray Mode Internal & External Spraying
Cooling Method The cooling method of motor, frequency converter and cutting part is water cooling
Spray Pump Station
Type РВ-320/6,3
Max. Pressure 6,3 МPа
Spray Water Flow 320 l/min
Supply Pipe KJR38/110
Matching Conveyor
Conveyor Model SGZ764/400,   SGZ830/630
Total Weight 44 t 46 t 50 t

Description

Scherer MG920 от "CoalMachGroup" This is a series of coal combines c electrical supply part. They have a built-in motor movement and a transverse recess coal. The total installed capacity of 920 kW. This cutting 2x400 kW electric motors, electric supply of the 2x50 kW and height adjustment of 18.5 kW. Harvester, supply voltage 1140 V. The machine is equipped with a frequency converter type "one tow - two ways to" control the feed rate frequency conversion alternating current and applied to the rack engagement. The combine is designed for operation in seams between 2.0 and 4.9 m at the corners of less than 16 ° (two-quadrant converter) or less than 35 ° (a four-quadrant converter) and medium strength of coal in the fully mechanized coal face.

Serial type includes:

Shortened type: MG400/920-WD, MG400/920-QWD;

Limit type: MG400/920-GWD, MG400/920-QGWD.

Main Parameters

Parameters of Mining Geological Condition MG400/920-(Q)WD MG400/920-(Q)GWD
Range of Mining Height 2,0 - 4,1 m 2,5 - 4,9 m
Applied Seam Inclination ≤16°(Two quadrant converter)
  ≤35°(Four quadrant converter)
Coal Hardness Medium hardness with a small amount of coal
Main Parameters
Machine Height 1530 mm 1980 mm
Machine Width 630, 800 mm
Max. Cutting Height 4103 mm 4900 mm
Dinting Depth 680 mm 640 mm
Cutting Part
Power of Cutting Motor 2х400 кW
Rotating Speed of Cutting Head 28,53  -  32,55 37,03 r/min
Cutting Head Diameter 1800, 2000, 2240 mm 2240 - 2500 mm
Feeding Part
Motor Supply Power 2х50 кW
Haulage Mode Gear, Pin-track
Haulage Force 660/395 кN
Haulage Speed 0-7,96-13,3 m/min
Operation Mode
Remote control is also available
Control Machine halt, change of speed, lifting/lowering of the cutting head can be completed through remote control
Spray and Cooling System
Spray Mode Internal & External Spraying
Cooling Method The cooling method of motor, frequency converter and cutting part is water cooling
Spray Pump Station
Type РВ-320/6,3
Max. Pressure 6,3 МPа
Spray Water Flow 320 l/min
Supply Pipe KJR38/110
Matching Conveyor
Conveyor Model SGZ 830/320 SGZ 880/800
Total Weight 60 t 65 t