Sinking Winch design of the brand DC, proekts and manufactured on the basis of the requirements "of sinking winch" under the number GB / T15112-2007, and it complies with the "Rules of safe production in mines" under the number GB / T3811-2008. This winch is primarily intended for sinking a vertical shaft in the mine, in the mines, as well as in a stationary position on the foundation.
To supply anything is possible in power and the length of the rope.
Name |
Parameters |
|
Working Load (the third layer) (kN) |
50 (vertical direction) |
|
Rope Speed (the third layer) (m/s) |
0.8 |
|
Rope Capacity (m) |
500 |
|
Drum Diameter (mm) |
700 |
|
Drum Width (mm) |
1000 |
|
Winding Layers |
5 |
|
Rope Diameter (mm) |
Ф22 |
|
Engine |
Model |
YZP250M2-6 |
Power (kW) | 45 | |
Rotating Speed (r/min) | 980 | |
Speed Reducer |
Model |
ZSZ950 |
Brake |
Model |
YWZ4-400/80 |
Disc Brake |
Model |
SBD100-1 (2 units) |
Oil Station |
Model |
PYZW-1 |
Voltage (V) |
380; 50(Hz) |
|
Dimensions (mm) |
2650*2050*1390 |
|
Weight (kg) |
Approx. 7000 |
|
Scope of Supply |
The whole equipment set: including electric control device and foundation embedded parts. (excluding wirerope) |