Track odnoplechny with hydraulic hammer drill mounted on a lightweight mobile cart
Attention: according to customer needs, you can still mount an additional diesel drive, solve the problem of the working body to move long distance.
The main purpose - to penetration in the coal mines, ore development, hydroelectric power, rail and road construction, as well as in the construction of tunnels, galleries. This machine uses a hydraulic drive with odnoplechnym oburivaniem, oburivaniya speed can reach up to 0.8-2 m / sec. The control system includes functions: automatic stop of the hammer to a final length, automatic protection against clamping probe and cleaning sludge water using Inductosyn. Easy operation, safe and reliable equipment. In this machine a small body, compact structure, the center of gravity at the bottom of the machine, non-straight, the method of crawler tracks, the work is stable, it can easily overcome the ups. Nonrectilinear hydraulic drill structure can lead drilling operation to produce face, ceiling, side of the system, floor.
This machine not only can dig and drill holes, according to the cross-section, after the installation of the patented "propeller", even more convenient, you can drill holes. The power plant is the only machine, power consumption is small, low noise, which helps to improve the working environment, improve the efficiency and quality of work is very suitable for the development of narrow and low generation.
Model |
DF10-1BD |
DF10A-1BD |
Drilling Speed (m/min) |
0.8-2 |
0.8-2 |
Length of Drill Rod (mm) |
2475 |
2475 |
Drilling Diameter (mm) |
27- 45 |
27- 45 |
Drilling Depth (one-time propulsion) (m) |
2.1 (Standard Configuration) |
2.1 (Standard Configuration) |
Applied Section (WХH) |
2 x 2 - 3.5 x 3.5 |
2 x 2 - 4 x 4 |
Travelling Speed (km/h) |
2.5 |
2.5 |
Gradeability (%) |
25 |
25 |
Quantity and Model of Drill Bit |
HYD200?1 |
HYD200?1 |
Dimensions (L×W×H) (m) |
6.5x0.9x1.5 |
7x0.9x1.5 |
Motor Power (kW) |
30 |
30 |
Weight (kg) |
6300 |
6500 |
Quantity and Model of Drill Boom |
ZB2.4 x 1 |
ZB2.9 x 1 |
Lifting/Lowering Angle (°) |
55/16 |
55/16 |
Angle of Ranging Arm Interior/Exterior (°) |
31/31 |
31/31 |
Compensation Stroke (m) |
1.5 |
1.5 |
Forward Rotation/Reverse Rotation (°) |
180/180 |
180/180 |
Quantity and Model of Propeller |
TJ2.1x1 |
TJ2.1x1 |
Pitch Angle (°) |
105/15 |
105/15 |
Swing Angle left/right (°) |
45/45 |
45/45 |
Track two-arm hydro-fied rock drill mounted on a lightweight mobile cart
Attention: according to customer needs, you can still mount an additional diesel drive, solve the problem of the working body to move long distance.
The main purpose - to penetration in the coal mines, ore development, hydroelectric power, rail and road construction, as well as in the construction of tunnels, galleries. This machine uses a hydraulic drive with odnoplechnym oburivaniem, oburivaniya speed can reach up to 0.8-2 m / sec. The control system includes functions: automatic stop of the hammer to a final length, automatic protection against clamping probe and cleaning sludge water using Inductosyn. Easy operation, safe and reliable equipment. In this machine a small body, compact structure, the center of gravity at the bottom of the machine, not a straightforward method is used caterpillar drive, stable operation, it can easily overcome the ups. Do not drill straight hydraulic structure can conduct drilling work for a slaughter ceiling side of the system, the floor.
This machine not only can dig and drill holes, according to the cross-section, after the installation of the patented "propeller", even more convenient, you can drill a hole . The power plant is the only machine, power consumption is small, low noise, which helps to improve the working environment, improve the efficiency and quality of work is very suitable for the development of narrow and low output.
Model |
DF20-2BD |
DF20A-2BD |
Drilling Speed (m/min) |
0.8-2 |
0.8-2 |
Length of Drill Rod (mm) |
2475 (Standard Configuration ) |
3050 (Standard Configuration ) |
Drilling Diameter (mm) |
27 - 45 |
27 - 45 |
Drilling Depth (one-time propulsion) (m) |
2.1 |
2.7 |
Applied Section (WХH) (m×m) |
2 x 2 - 5.2 x 3.8 |
2.5 x 2.5 - 5.5 x 4.5 |
Travelling Speed (km/h) |
3 |
3 |
Gradeability (%) |
25 |
25 |
Quantity and Model of Drill Bit |
HYD200x2 |
HYD200x2 |
Dimensions(LХWХH) (m) |
7.35x1.35x1.6 |
7.95x1.35x6 |
Motor Power (kW) |
45 |
45 |
Weight (kg) |
9600 |
9800 |
Quantity and Model of Drill Boom |
ZB2.4x 2 |
ZB2.9x 2 |
Lifting/Lowering Angle (°) |
55/16 |
55/16 |
Angle of Ranging Arm Interior/Exterior (°) |
14/47 |
14/47 |
Compensation Stroke (m) |
1.5 |
1.5 |
Forward Rotation/Reverse Rotation (°) |
180/180 |
180/180 |
Quantity and Model of Propeller |
TJ2.1x2 |
TJ2.7x2 |
Pitch Angle (°) |
105/15 |
105/15 |
Swing Angle left/right (°) |
45/45 |
45/45 |
Name |
Parameters |
|
Dimensions (L×W×H) (mm) |
11200*1650*2800 |
|
Drilling Diameter (mm) |
Ф32 - 102 |
|
Length of Drill Rod (mm) |
5350 |
|
Drilling Depth (m) |
5000 |
|
Drilling Speed (m/min) |
0.8-2 |
|
Applied Section (W×H) (m×m) |
3.5 * 3.5 – 7.5 * 8 |
|
Total Power of Motor (kW) |
55+2.2+7.5 |
|
Power of Internal Combustion Engine (kW) |
60 |
|
Weight (t) |
10 |
|
Min. Turning Radius (mm) |
3000 - 5500 |
|
Travelling Speed (m/sec) |
≤8 |
|
Gradeability |
≤8° |
|
Lifting/Lowering Angle (°) |
55°/ 16° |
|
Angle of Ranging Arm Interior/Exterior (°) |
35°/ 35° |
|
Forward Rotation/Reverse Rotation (°) |
180/180 |
|
Pitch Angle (°) |
105/15 |
|
Swing Angle left/right (°) |
45/45 |
|
Compensation Stroke (mm) |
1500 |
|
Overall Length of Propeller (mm) |
6580 |
|
Propelling Stroke (mm) |
5030 |
|
Max. Propelling Force (N) |
15000 |
|
System of Water Supply |
Air Pressure of Pneumatic Rock Drill (MPa) |
0.8 – 1.5 |
Pressure of Cooling Water (MPa) |
0.6 |
|
Percussion Circuit Pressure of Rock Drill (MPa) |
16 |
|
Drill Rod Circuit Pressure (MPa) |
10 |
|
Drill Boom Circuit Pressure (MPa) |
17.5 |
|
Propeller Circuit Pressure (MPa) |
10 |
|
Support Arm Circuit Pressure (MPa) |
18.5 |
|
Circuit Pressure of Travelling System (MPa) |
21 |
|
Rock Drill |
Model |
Doofor 550L |
Percussion Oil Pressure (MPa) |
13 - 16 |
|
Oil Consumption (L/min) |
95 – 120 |
|
Torque (N•M) |
975 |
|
Percussion Power (kW) |
15 |
|
Percussion Frequency (Hz) |
55 – 80 |
|
Rotating Speed (r/min) |
200 - 300 |
|
Drilling Diameter (mm) |
Ф 32 - 102 |
|
Weight of Rock Drill (kg) |
152 |
|
Electrical System |
Total Power of Motor (kW) |
55+2.2+7.5 |
Voltage (V) |
380/ 660 |
|
Rated Current (A) |
102 / 58.7 |
|
Rotating Speed of Motor (r/min) |
1470 |
|
Air Supply System |
Pressure of Auxiliary Oil Tank (MPa) |
0.03 |
The pressure at the blast hole (MPa) |
0.7 |
|
Air Pressure of Rock Drill (MPa) |
0.4 |
Technical specifications |
|||
Model |
SJZ-3.5 |
Х - 6 / 11 |
Х - 8 / 12 |
Quantity of Support Cylinder |
3 |
3 |
3 |
Quantity of Drill Boom |
3 |
6 |
8 |
Stratum Hardness |
|
f = 4÷20 |
f = 4÷20 |
Drilling Diameter (mm) |
ф 38-55 |
ф 38÷55 |
ф 38÷55 |
Drilling Depth (m) |
0 - 3,5 |
0 ÷ 5.2 |
0 ÷ 5.2 |
Drilling Direction (°) |
Left75 х Right75 |
120° |
90° |
Production Capacity (no less than) (m/h) |
|
90 |
120 |
Weight (kg) |
4200 |
9000 |
12000 |
Drillable Shaft Diameter (m) |
от 1,5 - 5 |
ф1.65 ÷ 11.5 |
ф1.7 ÷ 13.5 |
Overall Length (m) |
6,05 |
8 |
8 |
Diameter in Transportation Condition (m) |
1,15 |
1,9 |
2 |
Max. Air Flow Rate (m3/min) |
40 |
0.3 x 0.5 |
0.3 x 0.5 |
Working Air Pressure (MPa) |
0.5 х 0.7 |
0.5 x 0.7 |
0.5 x 0.7 |
Driving Mode |
Pneumatic Drive |
Pneumatic Drive |
Pneumatic Drive |
Power of Oil Station (kW) |
|
5,8 |
5,8 |
Model | Z-1200 | Z-4000 | Z-6000 |
---|---|---|---|
Drilling Depth (m) | 200 | 400 | 600 |
Drilling Diameter (mm) | 65,87,115 | 94,113,133 | 113,133,153,194 |
Diameter of Drill Rod (mm) |
smooth - ф50; helical - ф50/80 |
smooth - ф63/73; helical - ф60/100 |
smooth - 73/89 |
Drilling Inclination Angle | -20°~+45° | -20°~+45° | -10°~+10° |
Rated Rotating Speed (r/min) | 100? 600 | 50? 280 | 50? 210 |
Torque (N•M) | 1200/220 | 4000/1050 | 6000/1150 |
Propelling Force (kN) | 45 | 110 | 170 |
Pullout Force (kN) | 70 | 160 | 220 |
Stratum Hardness | f ?10 | f ?10 | f ?10 |
Travelling Speed (m/min) | 18 | 18 | 18 |
Gradeability | 20° | 20° | 20° |
Engine Power (kW) | 22 | 55 | 75 |
Weight (without anchor) (kg) | 3000 | 3500 | 4500 |
Dimensions (mm) | 2390x1100x1510 | 2850x1300x1650 | 3070x1490x1650 |
Roadway Size | roadway section>7.5 m2, roadway height> 2.5m, roadway width> 3.0m |